DIY Pumpkin Crayon Drip Project

DIY Pumpkin Crayon Drip Tutorial

We’ve all done the crayon drip on a canvas before but with fall in full swing & Halloween just around the corner, this updated version is exactly what you need to be making!

A very simple DIY that involves: one box of crayons, one pumpkin, some glue, & a blow dryer. Seriously, that’s it! Here’s how to make it:

DIY Pumpkin Crayon Drip Project

What you’ll need:

Pumpkin Crayon Drip Tutorial

Shop This DIY: pumpkin | knife | blow dryer (under $15!) | crayons | glue (or this)

Pumpkin Crayon Drip DIY

Step 1: Wash your pumpkin with cold water & dry completely.

Step 2: Cut crayons in half & unwrap top pointed portion of the crayon.

Step 3: Glue crayons pointing outward & around the tendril (handle) of the pumpkin.

Step 4: Let glue dry completely & then apply heat. All done!

DIY Pumpkin Crayon Drip Project

Tips:

Depending on if you’re using a plastic or real pumpkin, different glues might work best. I used a real pumpkin & found halfway through that Super Glue was my best option. For a plastic option, I’ve found a hot glue gun works best.

Depending on the wax & texture of your crayon you may find it hard to get the glue to stick. Try different glues & crayons until you find the best combo for you. (My combo: real pumpkin, Super Glue, & Crayola crayons)

Line work area with paper towel or newspaper–these crayons will splatter all over your table!

When using the blow dryer I used low heat & it took about 30 seconds to 1 minute for each crayon to melt completely. Angling the blow dryer different ways lets the paint splatter all over your pumpkin!

DIY Pumpkin Crayon DripDIY Melting Crayon Pumpkin Tutorial

Comments

  1. Debbie says

    Love this idea…do they sell just fall colors in a box? If not here I come $1 store so I can be selective with my colors.